Mining Intelligence and News
Philippines

Siana Mine

Click for more information

Categories

Overview

Mine TypeOpen Pit
StatusActive
Commodities
  • Gold
  • Silver
Mining Method
  • Truck & Shovel / Loader
Production Start... Lock
Mine Life... Lock
SnapshotSoft-recommissioning and rehabilitation of the mill was commenced in December 2022 after the plant had stood idle through a long period of care and maintenance since the decision of Red 5 Limited/GRC Siana to suspend operations in April 2017.

Milling operations resumed on March 18, 2024. Recoveries are expected to increase as the mill stabilizes and the ramp-up of mill throughput is also expected to continue in the coming months as Siana moves toward commercial production. The nameplate capacity of the GRC Siana Outotec mill is 1.1 million tonnes per annum.

Mining operations in the Siana open-pit continue to ramp-up.

TVI Pacific Inc. announces a voluntary suspension of mining operations at the Siana Gold Mine as a result of an unforeseen failure of the embankment of Tailings Storage Facility 3 that occurred on May 11, 2024. Milling operations have continued utilizing the existing run-of-mine stockpile and as of June 30, 2024 mining operations restarted.

Owners

SourceSource
CompanyInterestOwnership
TVI Pacific Inc. 30.66 % Indirect
Greenstone Resources Corp. (operator) 100 % Direct
Ownership Tree
TVI Pacific Inc. (“TVI”) holds a 30.66% interest in TVI Resource Development Phils., Inc. (“TVIRD”). TVIRD continues to be the 100% owner and operator of the Siana gold mine.

In July 2021, TVIRD completed the acquisition of the 100% outstanding shares of Greenstone Resource Corporation (GRC) and took over the operations of the Siana Gold Project and Mapawa Gold Project.

Contractors

Lock

- subscription is required.

Deposit type

  • Replacement
  • Epithermal
  • Breccia pipe / Stockwork

Summary:

Deposit Type: Gold-Silver Replacement Type Deposit.

The Surigao Peninsula at the northeastern tip of Mindanao is characterized physiographically by a narrow north-northwest trending ridge, the Malimono ridge, and the wider and more geologically complex Diwata mountain range to the east. Intervening between these two topographic highs is a structurally-controlled valley, in fact a graben, from the Surigao lowlands in the north, to Lake Mainit and the Tubay Valley southwards. This topographically depressed corridor is interrupted by a young volcanic center, the Maniayao highlands, sitting north of Lake Mainit.

The oldest rock unit identified in Siana Project is the Bacuag formation, the limestone and marly sedimentary members of which mainly host the gold mineralization in the Siana mine. Unconformable on top of the Bacuag is the Middle-Late Miocene Mabuhay Clastics, observed southwest of the Siana pit, and the Late MiocenePliocene Timamana limestone, occurring as tower karsts mostly east of the Siana mine. The Bacuag and, probably, the Mabuhay clastics, are intruded by porphyritic andesite that is related to the Pliocene Maniayao volcanism. The andesite porphyry in the northern tip of the Siana pit is observed as post mineral intrusion to the Bacuag.

North-northwest trending faults are the major structures, several splays of which transect the parcel, including horse-tail splits in the north. Antithetic northeasterly faults are also observed to intersect the northwesterlies, as observed in the Siana pit. Such geological setting continues in the southern portion of the Siana MPSA, including the Alegria claim, where regional north-northwest to south-southeast structures transecting Siana extend southwards. The dominant rock types in the Alegria parcel, however, are volcaniclastic sequences and the intruding andesite porphyry.

MINERALIZATION
Siana is located along the Surigao Valley Fault, a major structure that is part of the Philippine Fault Zone. The area is known for various mineralization such as epithermal gold and porphyry-type copper-gold mineral deposits.

Mineralization in the Siana orebody occurs in both the limestone and basalt members of the Bacuag Formation, although earlier works describe mineralization to be confined only in the carbonates (UNDP, 1988). Ore in the limestone occurs as either high grade “massive sulfide” bodies consisting of pyrite, sphalerite, galena, chalcopyrite and quartz in cavities, or as disseminated gold in the clay or gouge portions and limestone. The massive sulfide bodies are as much as 7 meters long, with gold grades reaching 30 g/t Au.

Basalt-hosted mineralization to the east of the Siana pit occurs in soft, bleached, pyritic alteration zones, often 10 meters or more in width, over a lateral distance of approximately 140 meters. Minor mineralization also occurs within the volcaniclastics of the Mabuhay Formation. Mineralization progressively narrows to the south in both the carbonate and basalt hosts but is known to persist to approximately 400 meters below surface.

Reports indicate that the gold and sulfide mineralization present in the southern portion of the Siana tenement are hosted in andesite porphyry and intruded sediments where gold mineralization is more widespread. Exploration soil geochemistry indicates that a high level or near-surface epithermal system is possibly preserved in the area. A deeper copper-dominated type of mineralization reportedly appears to characterize the Alegria claim. Lenses of massive sulfides and hematite have been encountered in the immediate vicinity, prompting earlier workers to consider a skarn type origin for such mineralization.

In cross section, the central carbonate breccia varies between 20m to 80m in width below the current open pit floor (the main ore zone). Adjacent and west, the volcaniclastic sediments are often bleached and carbonate altered, and host some economic gold mineralisation. Distal chlorite altered sediments are barren. The basalt hosted mineralisation to the east occurs in numerous discrete soft, bleached, pyritic alteration zones, often 10m or more in width, over a lateral distance of approximately 140 metres. Hard fresh basalt between the lodes is barren. Mineralisation progressively narrows to the north and south in both the carbonate and basalt hosts, but is known to persist to approximately 400m below surface, but narrowing. The mineralisation is generally is sub vertical to steeply dipping to the east at approximately -70 degrees. The main mineralised zone strikes N-S to NNW-SSE and also trends to the NE in the northern section of the resource. The Siana resource has a strike length of approximately 500 metres with mineralisation down to approximately 500 metres below surface.

The majority of the Siana mineralisation occurs in what is referred to as the “Main Zone”. The Main Zone occurs along a steeply dipping structural corridor between volcaniclastics on the footwall and basalt on the hanging wall. The structural corridor controls the strike, dip and shape of the Main Zone. In addition to the Main Zone, there are three smaller sub-parallel footwall lenses and nine sub- parallel hanging wall lenses which contribute to the resource.

The Main Zone strikes at 330° to 360° and dips at -60° to -90° to the north-east. The strike length of the Main Zone is about 450m, known down dip extent is over 500m and the across strike horizontal thickness ranges up to about 60m. Main Zone includes six zones of internal waste, the largest of which has a strike length of nearly 400m, a down dip extent of about 400m and an across strike horizontal thickness of up to about 15m. The Main Zone extends to about 500m below the original ground surface.

The three footwall zones are relatively small compared to the Main Zone and strike and dip parallel to the Main Zone. Strike lengths range from 20m to 250m, down dip extents range from 50m to about 250m and across strike horizontal thicknesses are less than 10m. The footwall zones extend to about 500m below the original ground surface.

The nine hangingwall zones strike at about 360° and dip steeply to the east. Strike lengths range from 10m to 250m, down dip extents range from 100m to about 400m and across strike horizontal thicknesses are generally less than 15m. The hangingwall zones are known to about 450m below the original ground surface.

Reserves

Lock

- subscription is required.

Mining Methods

Lock

- subscription is required.

Comminution

Crushers and Mills

Lock

- subscription is required.

Processing

Lock

- subscription is required.

Production

Production is shown for the period from January to August 2023.
CommodityUnits202320172016
Gold oz  ....  Subscribe41,37059,663
Silver oz  ....  Subscribe38,05760,307
All production numbers are expressed as metal in doré.

Operational metrics

Metrics202320222020201720162015
Plant annual capacity  ....  Subscribe  ....  Subscribe  ....  Subscribe1.1 Mt
Tonnes processed  ....  Subscribe  ....  Subscribe  ....  Subscribe587,461 t692,384 t
Daily processing capacity  ....  Subscribe  ....  Subscribe  ....  Subscribe
Ore tonnes mined  ....  Subscribe  ....  Subscribe  ....  Subscribe620,007 t786,000 t
Waste  ....  Subscribe  ....  Subscribe  ....  Subscribe1,349,000 bcm3,258,000 bcm

Production Costs

Commodity production costs have not been reported.

Operating Costs

Currency20172016
Processing costs ($/t milled) AUD  ....  Subscribe  ....  Subscribe

Financials

Units2017
Revenue M AUD 68.5  
Gross profit M AUD -3.2  
Pre-tax Income M AUD -10.3  

Heavy Mobile Equipment

Lock

- subscription is required.

Personnel

Mine Management

Job TitleNameProfileRef. Date
....................... Subscription required ....................... Subscription required Subscription required Sep 27, 2024
....................... Subscription required ....................... Subscription required Subscription required Sep 27, 2024
....................... Subscription required ....................... Subscription required Subscription required Sep 27, 2024
....................... Subscription required ....................... Subscription required Subscription required Sep 27, 2024

Aerial view:

Lock

- subscription is required.