Copper Mountain Expansion Project

Click for more information



Mine TypeOpen Pit
 Archived Information
  • Copper
  • Silver
  • Gold
Mining Method
  • Truck & Shovel / Loader
Mine Life... Lock
SnapshotSince completing the acquisition of Copper Mountain on June 20, 2023, Hudbay Minerals has been focused on advancing its plans to stabilize the operation.

Further details of stabilization plans will be provided in a new technical report for the Copper Mountain mine,
which is expected to be released in the fourth quarter of 2023. The new technical report will include an updated mine plan and updated annual production and cost estimates for the Copper Mountain mine, which will reflect stabilization and optimization initiatives, and the costs associated with planned accelerated stripping. Accordingly, Hudbay Minerals does not expect its mineral reserve and resource estimates and mill throughput expansion assumptions to be consistent with those disclosed in Copper Mountain’s most recent technical report dated September 30, 2022.
Related AssetCopper Mountain


Mitsubishi Materials Corp. 25 % Indirect
Hudbay Minerals Inc. 75 % Indirect
Copper Mountain Mining Corporation owns 75% and Mitsubishi Materials Corp. owns 25% in the Copper Mountain mine. All claims are controlled by Copper Mountain Mine (BC) Ltd., which is a subsidiary of Copper Mountain Mining Corporation.

On June 20, 2023, Hudbay Minerals Inc. closed its previously announced court-approved plan of arrangement with Copper Mountain Mining Corporation (“Copper Mountain”), pursuant to which Hudbay has acquired all of the issued and outstanding common shares of Copper Mountain. Copper Mountain is now a wholly-owned subsidiary of Hudbay.



- subscription is required.

Deposit type

  • Porphyry


The Copper Mountain (CM) deposit is an example of an alkalic porphyry deposit, in which copper–gold mineralization is spatially and genetically associated with multiple pulses of volumetrically restricted, and compositionally varied, alkaline porphyry intrusions.

The bulk of the known copper mineralization at Copper Mountain occurs in a northwesterly trending belt of Nicola Group rocks, approximately 5 km long and 2 km wide, that is bounded in the south by the CMS and in the west side by the northernly trending Boundary Fault system. Here copper mineralization occurs as structurally controlled, multidirectional veins and vein stockworks, with peripheral disseminations. Mineralization had been subdivided into four types, as follows: 1) disseminated and stockwork chalcopyrite, bornite, chalcocite, and pyrite in altered Nicola Group volcanic rocks and LHIC rocks; 2) bornite-chalcopyrite associated with pegmatite-like veins (coarse masses of orthoclase, calcite, and biotite; 3) magnetite-(±hematite)-chalcopyrite replacements and/or veins); and 4) chalcopyrite-bearing magnetite breccias (Fahrni et al., 1976; Klue et al., 2020; Preto, 1972; and Stanley et al., 1995). All mineralization types can be found in each pit area, but each pit is unique with respect to the relative quantities and character of mineralization type.

Disseminated and stockwork chalcopyrite–bornite–chalcocite-(±pyrite) mineralization formed much of the core of the deposit in the southern area of the CM Main Pit (formerly known as Pit 3). In the highestgrade areas that were mined underground, bornite and chalcopyrite veins have locally been replaced on their margins by minor amounts of bladed specular hematite, digenite, chalcocite, and epidote. These replacements are interpreted to be a late hydrothermal overprints on the bornite-chalcopyrite bearing veins, possibly during collapse and cooling of the magmatic hydrothermal system.

Bornite-chalcopyrite mineralization associated with “pegmatite-like” veins are either barren of sulphides or contain chalcopyrite and magnetite with either bornite or, less commonly, pyrite. Historically, these have been subdivided into several different groups, based upon mineralogy: 1) barren veins; 2) bornite–chalcopyrite–(magnetite) bearing veins; and 3) chalcopyrite–pyrite–(magnetite)–bearing veins. Sulphide-absent pegmatite-textured veins occur locally across the mine area. In contrast, the distribution of the sulphide-bearing pegmatite-textured veins defines an “inner” bornite–chalcopyritebearing zone and an “outer” chalcopyrite–pyrite-bearing zone. The inner zone is situated along the northern contact of the CMS within the Nicola Group (in the vicinity of the historical Pits 1 and 3); however, these veins do not penetrate more than 1 m into the CMS (Stanley et al., 1995).

Magnetite–hematite–chalcopyrite replacements and veins primarily existed in the historical Virginia Pit (now known as the CM North zone), and within prospects hosted by the LHIC. They are commonly dilatant, planar, and occur in “sheeted” parallel sets, but in some cases form crackle zones a few metres wide. They are mineralogically similar to the chalcopyrite–pyrite-bearing pegmatite-textured veins, but carry significantly higher gold grades (Stanley and Lang, 1993) relative to other mineralized zones to the east. Chalcopyrite precipitated after pyrite and magnetite within these veins and native gold has been observed associated with chalcopyrite over-grown by pyrite. Gangue calcite, is typically interstitial to magnetite and sulphides.

Magnetite filled breccias with potassically altered clasts of Nicola Group volcanic and LHIC dykes occur within the Ingerbelle Pit and the north side of the CM Main Pit. They occur as elongate bodies along faults, or as roughly circular bodies at fault intersections. These breccias are mineralized with chalcopyrite and pyrite and are bounded by a higher-grade zone of copper–gold mineralization. The breccias include stockworks on their margins, crackle breccias, and clast-supported partially-milled breccias in their cores. The alteration mineralogy of these breccias is closely associated with magnetite–sulphide veins, and are interpreted to be a different structural representation of the hydrothermal event that formed the magnetite–sulphide veins (Stanley et al, 1995).



- subscription is required.

Mining Methods


- subscription is required.


Crushers and Mills


- subscription is required.



- subscription is required.


CommodityUnitsAvg. Annual
Silver koz 367
Gold koz 54
Copper Equivalent M lbs 138
All production numbers are expressed as metal in concentrate.

Operational metrics

Daily mining rate  ....  Subscribe
Daily milling capacity  ....  Subscribe
Hourly processing capacity  ....  Subscribe
Annual milling capacity  ....  Subscribe
Waste tonnes, LOM  ....  Subscribe
Ore tonnes mined, LOM  ....  Subscribe
Total tonnes mined, LOM  ....  Subscribe
Tonnes milled, LOM  ....  Subscribe
* According to 2022 study.

Production Costs

Assumed price Copper USD  ....  Subscribe
Assumed price Silver USD  ....  Subscribe
Assumed price Gold USD  ....  Subscribe
* According to 2022 study / presentation.

Operating Costs

Processing costs ($/t milled) USD 3.68 *  
* According to 2022 study.

Project Costs

MetricsUnitsLOM Total
Expansion CapEx $M USD  ......  Subscribe
Processing OpEx $M USD 87.4

Heavy Mobile Equipment


- subscription is required.


Mine Management

Job TitleNameProfileRef. Date
....................... Subscription required ....................... Subscription required Subscription required Aug 1, 2022
....................... Subscription required ....................... Subscription required Subscription required Aug 1, 2022
....................... Subscription required ....................... Subscription required Subscription required Jan 16, 2024
....................... Subscription required ....................... Subscription required Subscription required Jan 16, 2024

Aerial view:


- subscription is required.