Mining Intelligence and News
Australia

Plutonic (Open pit) Mine

Click for more information

Categories

Overview

Mine TypeOpen Pit
StatusTemporary Suspension
Commodities
  • Gold
Mining Method
  • Truck & Shovel / Loader
Production Start... Lock
SnapshotOpen-pit mining in the Main Pit Deeps at the Plutonic Gold Mine was suspended in October 2022 due to operational underperformance.

.
Related AssetPlutonic Operation

Owners

SourceSource
CompanyInterestOwnership
Catalyst Metals Limited 100 % Indirect
On 29 June 2023, Catalyst Metals acquired 100% of the ordinary shares of Superior Gold Inc., a Canadian-based gold producer that owns 100% of the Plutonic Gold Operations located in Western Australia, through its wholly-owned subsidiary Billabong Gold Pty Ltd.

Contractors

Lock

- subscription is required.

Deposit type

  • Replacement
  • Vein / narrow vein

Summary:

Deposit Type
The Plutonic Gold Mine deposits are Archean Greenstone gold deposits. The gold mineralisation is predominantly structurally controlled occurring in a variety of stratigraphic settings, mainly associated with replacement-style lodes and stockwork veining within a wide variety of host rocks ranging from ultramafic and mafic volcanic rocks, metasediments, felsic intrusive, volcanoclastic units, and banded iron formations.

Mineralisation
Plutonic
The Plutonic Gold Mine Mineral Resources mined and unmined lie with a surface area of approximately 10 km east-west by 5 km north-south. The historical Plutonic Main Pit is approximately 1.5 km long by 800 m wide by 200 m deep. Current Mineral Resources being mined at the Plutonic Gold Mine including the Main Pit, Indian, Indian Extension, Baltic and Baltic Extension lies in a semi-continuous mineralised trend that extends from the base of the open pit 1.7 km down plunge (880 m in elevation) and mineralisation is 1-3 m thick but individual mineralised pods have a short range (generally <30 m).

The Cortez-Area 134-Timor zone extends approximately 1.2 km north-south, by 1.0 km east-west.

The main style of gold mineralisation (Plutonic brown-lode) typically occurs as thin (~1 – 3 m wide) lodes that consist predominantly of quartz-biotite-amphibole-titanite-epidote-carbonate-tourmaline-arsenopyritepyrrhotite ± chalcopyrite ± scheelite ± gold. Visible gold is considered to have occurred at a late-stage during the evolution of the deposit as it is largely undeformed and overprints most, if not all, of the minerals and fabrics. It is typically associated with thin, discontinuous quartz-calc-silicate veins within the brown-lodes. Where these gold-bearing zones are well developed, they tend to be near-parallel to the stratigraphy as marked by the rare metasedimentary horizons and to the dominant foliation, which is also typically parallel to metasediment horizons. Geochemistry suggests that these lodes developed on the boundary between mafic units or are focused along or adjacent to minor metasedimentary units within the Mine Mafic unit. Lodes may be rich in arsenopyrite or pyrrhotite, and while arsenopyrite is a good indicator of mineralisation, it may not be present in all mineralisation.

Mineralisation at Plutonic is separated into four distinct styles:
• Replacement “brown” or “Plutonic” lodes (which contain the bulk of the gold)
• Replacement “green lodes”
• “Invisible lodes”
• Dilation high angle quartz veins

The Plutonic “Brown lodes” are characterised by a series of moderately-dipping to very flat-lying, stacked, banded replacement-style lodes, individually up to five metres wide, that are hosted within ductile mylonitic shear zones, oriented slightly oblique to the main stratigraphic contacts. Hydrothermal alteration during midto lower-amphibolite facies conditions has resulted in a zoned hydrothermal assemblage consisting of plagioclase–biotite-quartz-amphibole-titanite-carbonate-arsenopyrite-pyrrhotite-tourmaline-muscovite-pyritescheelite-gold-sphalerite. The replacement style lodes are restricted within the Mine Mafic unit, preferentially within the Upper Mine Mafic unit, sub-parallel to primary lithological contacts. Arsenopyrite associated with gold mineralisation at Plutonic is subtly zoned with respect to gold, antimony, and arsenic abundance. Within individual grains of arsenopyrite there is a negative correlation between gold and antimony (core). Arsenic abundance generally increases from core to rims, indicating increasing temperature. There is a conspicuous lack of quartz veining associated with mineralisation except where the ductile shear zones have intersected early quartz veins subsequently deforming them. Wall rock alteration adjacent to the lodes is very narrow, often confined to 20 cm to 30 cm. Mass balancing of the lodes against the host amphibolite indicates a general SiO2 loss of seven to ten percent and volume decreases of up to 30%.

Plutonic “Invisible Lodes” are less common than the Plutonic Brown and Green lodes. These are more abundant in the Zone 19 area. They do not occur within ductile shear zones but are developed predominantly within the upper five metres of the Upper Mine Mafic unit within the hornblende amphibolite. Gold is finely disseminated throughout an apparently unaltered groundmass in which minor pyrrhotite and pyrite are associated. There is no biotite, albite or arsenopyrite alteration. In higher-grade examples, free gold is sited within quartz-carbonate veins oriented parallel to overprinting local penetrative fabrics with no associated sulphides or visible alteration halo.

Quartz vein hosted mineralisation is the least abundant form of mineralisation and is mainly located close to the Quartz Hill Thrust which separate the Overthrust mafic to the Hangingwall Ultramafic or proximal to high angle dolerite dykes where the dykes cut replacement lodes. Above the Quartz Hill Thrust, gold is associated with pyrrhotite-pyrite-sphalerite-galena in quartz veins and unlike the shear zone-related gold mineralisation at Plutonic there is an absence of arsenic. Immediately below the Quartz Hill Thrust, high grade gold mineralisation is present in close proximity to Brown lode mineralisation. Coarse gold is observed within quartz veining and silica flooding. The gold overprints the Brown lode layer parallel fabric, possibly indicating a remobilised origin for this coarse free gold.

The mineralisation of the Plutonic Gold Mine is truncated to the south by a local structure called the MPS Fault, a minor fault splay off the major regional structure known as the MMR Fault.

Reserves

Lock

- subscription is required.

Mining Methods

Lock

- subscription is required.

Comminution

Crushers and Mills

Milling equipment has not been reported.

Processing

Lock

- subscription is required.

Production

CommodityUnits20222021
Gold oz  ....  Subscribe  ....  Subscribe
All production numbers are expressed as metal in doré.

Operational metrics

Metrics20222021
Stripping / waste ratio  ....  Subscribe  ....  Subscribe
Ore tonnes mined  ....  Subscribe  ....  Subscribe
Waste  ....  Subscribe  ....  Subscribe
Total tonnes mined  ....  Subscribe  ....  Subscribe
Tonnes processed  ....  Subscribe  ....  Subscribe

Production Costs

Commodity production costs have not been reported.

Heavy Mobile Equipment

Lock

- subscription is required.

Personnel

Mine Management

Job TitleNameProfileRef. Date
....................... Subscription required ....................... Subscription required Subscription required Dec 20, 2023
....................... Subscription required ....................... Subscription required Subscription required Dec 20, 2023
....................... Subscription required ....................... Subscription required Subscription required Dec 20, 2023

Aerial view:

Lock

- subscription is required.